新闻中心 》公告    

长电产品声明书
发布时间:2017/11/16
声明
Statement
1. 注意事项 Announcements
保存半导体器件时,建议优选干燥包装,如下事项需注意。
For semiconductor device storage, it is suggested to choose dry packing as preference. The following should be noted:
 如不采用干燥包装,产品有可能受湿气或外界环境影响,
 The product may be affected by moisture or external environment if without using dry packing.
 保管的温度和湿度必须适当,最好是在 5~40℃(推荐 20~30℃)、30~80%RH(推荐 40~60%RH)的范围内,不建议在高温高湿或温度急剧变化的环境存放。
 The storage temperature and humidity must be appropriate, preferably in the range of 5~40℃(20~30℃ is recommended), 30~80% RH(40~60% RH is recommended). Do not store the products at the place of high temperature, high humidity or temperature changed radically.
 在保管地点的周围,无有害气体,并保持灰尘较少。
 Around the storage place, keep less dust and no harmful gases.
 在保管期间,请选择不易带静电的载具。
 During the storage, please choose the anti-static container.
 在保管期间,请不要将重物放在半导体器件上。
 During the storage, please do not place heavy objects on semiconductor devices
 在保管期间,半导体器件不能加负载。
 During the storage, the semiconductor devices cannot be loaded current, voltage, and so on.
2. 声明 Statement
 长电科技保留说明书的更改权,恕不另行通知!客户在下单前应获取最新版本资料,并验证相关信息是否完整和最新。
 JCET reserves the right to change the instructions and no longer give a notice. Customer should obtain the latest version of the information before placing the order and be sure that the information is complete and latest.
 任何半导体产品特定条件下都有一定的失效或发生故障的可能,买方有责任在使用长电科技产品进行系统设计和整机制造时遵守安全标准并采取安全措施,以避免潜在失败风险可能造成人身伤害或财产损失情况的发生!
 Any semiconductor product has the a possibility of failure or malfunction under certain conditions. Buyers should comply with safety standards and take safety precautions when JCET products are used for system design and manufacturing.
 产品提升永无止境,我公司将竭诚为客户提供更优秀的产品。
 The product promotion is endless, and our company will be dedicated to provide customers with better products.


江苏长电科技

分立器件产品开发部
2017 年 11 月 6 日